For Better Performance Please Use Chrome or Firefox Web Browser

Publications

Journal Papers:

  1. The effects of boric acid on crystal structure, nano-/microstrcuture and photoluminescence characteristics of rare-earth doped Y2O3/YBO3 composite compounds, Journal of Nanostructure in Chemistry 7(4), 367-373, 2017
  2. Sigma Phase-Induced Failure of AISI310 Stainless Steel Radiant Tubes, Engineering Failure Analysis 82, 56-63, 2017
  3. A case study on failure of AISI 347H stabilized stainles steel pipe in a petrochemical plant, Case Studies in Eng Failure Analysis 9, 52-62, 2017
  4. Modeling of strain-hardening in Al-Mg-Si alloys, Metallurgical and Mater Trans A- Physical Metallurgy and Materials Science, 44 (5) 2409-2417, 2013
  5. An age-hardening model for Al-Mg-Si alloys considering needle-shaped precipitates, Metallurgical and Mater Transactions A - Physical Metallurgy and Materials Science, 43(11), 4445-4453, 2012
  6. Toward a Recrystallized Microstructure in Extruded AA6005A Alloy, Light Metals, 347-350, 2013
  7. A precipitation-hardening model for non-isothermal ageing of Al–Mg–Si alloys, Computational Materials Science, 45, 385-387, 2009
  8. Mechanical behavior modeling of nanocrystalline NiAl compound by a feed-forward back-propagation multi-layer perceptron ANN, J. Computational Mater Science 44, 1231–1235, 2009
  9. Using GA-ANN algorithm to optimize soft magnetic properties of nanocrystalline mechanically alloyed Fe-Si powders, J. Computational Materials Science 44, 1218–1221, 2009
  10. An age-hardening model for the interrupted ageing of the alloy AA6061, Proceedings of the 12th International Conference on Metal Forming, Poland, 224-231, 2008
  11. On the mechanisms of temperature-dependent precipitation in Al-Mg-Si alloys during multi-step ageing. Aluminium alloys, their physical and mechanical properties, Weinheim, Germany: Wiley-VCH, 975-980, 2008
  12. Strength, deformation, and fracture: A systematic study of the effect of interrupted ageing conditions on the strength and toughness development of AA6061, Aluminium alloys, their physical and mechanical properties Wiley-VCH, 1457-1463, 2008
  13. Characterization of mechanically alloyed Fe100−xSix and Fe83.5Si13.5Nb3 nanocrystalline powders, J. Mater Processing Techn, 203, 554–560, 2008
  14. Effects of tungsten on erosion–corrosion behavior of high chromium white cast iron, Materials Science and Engineering A, (454-455) 623-628, 2007  
  15. Using genetic algorithm and artificial neural network in flow stress optimization of 304 stainless steel under cold and warm compaction, J. Mater and Design 28, 609-615, 2007
  16. Using genetic algorithm in heat treatment optimization of 17-4PH stainless steel, J. Materials and Design 28, 2034-2039, 2007
  17. Effects of tungsten on erosion–corrosion behavior of high chromium white cast iron, Materials Science and Engineering A 454-455, 623-628, 2007
  18. Prediction of porosity percent in Al–Si casting alloys using ANN, Materials Science and Engineering A 431, 206-210, 2006
  19. Structural and soft magnetic properties of nanocrystalline Fe85Si10Ni5 powders prepared by mechanical alloying, Materials Letters 60, 1068-1070, 2006
  20. Using genetic algorithm and artificial neural network analyses to design an Al-Si casting alloy of minimum porosity, J. Materials and Design 27, 605-609, 2006
  21. Prediction of mechanical properties of DP steels using neural network model, J. Alloys and Compounds 392, 177-182, 2005
  22. Effects of conventional heat treatment on wear resistance of AISI H13 tool steels, Wear 258, 846-851, 2005
  23. Preparation of nanocrystalline Fe-Si-Ni soft magnetic powders by mechanical alloying, Materials Science and Engineering B 123, 74-79, 2005
  24. Effective parameters modeling in compression of an austenitic steels using artificial neural network, J. Computational Materials Science 34, 335-341, 2005
  25. A new method in prediction of TCP phases formation in superalloys, Materials Science and Engineering A 396, 138-142, 2005
  26. Effects of conventional heat treatment on wear resistance of AISI H13 tool steel, Wear, (258) 846-851, 2005

 

Conference Papers:

  1. Metal Dusting in a Syngas Reactor, 18th National Corrosion Conference, January 2018, Tehran, Iran
  2. Metal Dusting of Alloy 800H, Used in a Reformer, 18th National Corrosion Conference, January 2018, Tehran, Iran
  3. Corrosion in Aluminum Foils, Used in Food Packaging Industry, 18th National Corrosion Conference, January 2018, Tehran, Iran
  4. Microstructural Characteristics of 3D Printed Ti-6Al-4V, Titanium Conference, December 2017, Tehran, Iran 
  5. Failure analysis of a broken HIP prosthesis, The 6th Int. Metallurgy and Materials Conference IMAT 2017, 26-29 Oct., Teahran, Iran
  6. Microstructural characteristics of nano-structured Fe-28.5Ni steel by means of severe plastic deformation (SPD), Int Conference Nano SPD, July 2-8, 2017 in Sydney, Australia
  7. Materials Selection Concepts for Sport Balls, Advanced Materials and Manufacturing Methods in Industries, May 2017, Tehran, Iran
  8. Reheat Cracking, Mechanisms and Mitigation Strategies, Int. Welding and NDT Conference (IWNDT2016),  Dec 2016, Tehran, Iran
  9. Challenges in future developments of aluminium alloys, Invited speaker at 4th international aluminium conference, May 2016 Iran
  10. Aluminum Extrusion Technology, Workshop at 4th int aluminium conference, May 2016 Iran
  11. An Overview of Scanning Acoustic Microscope a Reliable Method for Non-destructive Failure Analysis of Microelectronic Components, EurosimE2015, Budapest Hungry
  12. Toward a recrystallised structure in extruded AA6005A profiles, TMS2013, March 2013 USA
  13. Modeling of precipitation sequence in Al-Mg-Si alloys, Int. Aluminum Conference (ICAA12), Sept. 2010 Japan
  14. Mixed mode age-hardening model for Al-Mg-Si alloys, TMS2010, Feb. 2010, Seattle USA
  15. An ageing model for Al-Mg-Si alloys assuming the needle-shaped morphology for precipitates, Proc. 12th Int. Conference on Al Alloys, The Japan institute of Light Metals, 2010, 401-406, Tokyo Japan
  16. Interrupted ageing of Al-Mg-Si alloys, Materials innovation Conference, Dec. 2010 the Netherlands
  17. Multi-scale modeling of ageing in Al-Mg-Si alloys, Materials innovation Conference, Dec. 2009 the Netherlands
  18. A work-hardening model for interrupted aged Al-Mg-Si alloys, Metal Forming Conference, Sept. 2008 Poland
  19. On the mechanisms of precipitation hardening during multi-step ageing, Int. Al Conf. (ICAA11), Sept. 2008 Germany
  20. An age-hardening model for Al-Mg-Si alloys, EuroMat 2007, Nuremberg, Germany